Loading ...
Loading ...
Loading ...
Page 1305.17.17
HARD WIRING CONNECTION
If it is necessary to hard wire this appliance, a qualied electrician must remove the cord connection, and
wire the appliance directly to the house hold wiring. This appliance must be electrically connected and
grounded in accordance with local codes.
Hard Wiring Installation
TURN OFF THE APPLIANCE COMPLETELY AND LET COOL BEFORE SERVICING. ONLY A QUALIFIED
SERVICE PERSON SHOULD SERVICE AND REPAIR THIS ELECTRIC APPLIANCE.
WARNING
1. Remove the cover plate from either the left side or right side of the appliance base on the nearest location
of the power outlet. Remove the two screws, as shown in FIGURE 1. Unscrew and remove power cord.
FIGURE 1
2. Attach the wiring to the junction block. Please make sure the live wire goes into the “L”, the neutral wire
goes into “N” and the ground wire goes into “G”.
3. Put the plate back and screw back.
NOTE: Leave enough wire so that the appliance can be removed from the enclosure without
disconnecting the power supply.
L N G
Loading ...
Loading ...
Loading ...