Loading ...
Loading ...
Loading ...
Servicing Your Honda 73
(1) ignition coil connectors (3) bolt and washer
(2) clamp
11. Remove the bolt (4), ground wire (5) and
ignition coil/stay (6).
Piston/Piston Rings/Piston Pin
Cylinder Head Removal
1. Clean the area above the engine before
disassembly to prevent dirt falling into the
engine.
2. Drain the radiator coolant after cooling the
motorcycle (page 139).
3. Remove the seat and hang the fuel tank
(pages 33, 34).
4. Remove the muffler (page 97) and subframe
(page 36).
5. Remove the exhaust pipe (page 99).
6. Remove the spark plug (page 63).
7. Remove the cylinder head cover (page 64).
8. Set the piston at TDC on the compression
stroke (page 64).
9. Remove the camshaft holder, camshaft, valve
lifters and shims (page 66).
10. Disconnect the ignition coil connectors (1)
and unclamp them from the clamp (2) .
Remove the bolt and washer (3).
(7) ECT sensor connector
13. Loosen the radiator hose clamp screw (8) and
disconnect the radiator hose (9).
(8) radiator hose clamp screw
(9) radiator hose
(3)
(2)
(1)
(9)
(8)
(cont’d)
(4) bolt (6) ignition coil/stay
(5) ground wire
(5)
(4)
(6)
12. Disconnect the ECT sensor connector (7).
(7)
Loading ...
Loading ...
Loading ...