Loading ...
Loading ...
Loading ...
62 Servicing Your Honda
Clutch System
(9) O-ring (new) (10) clutch cover
11. Lubricate the dust seals (11) and rear brake
pedal pivot bolt (12) with urea based multi-
purpose grease or equivalent.
12. Apply locking agent to the brake pedal pivot
bolt threads.
13. Install the dust seals into the rear brake
pedal (13).
(11) dust seals (14) washer
(12) brake pedal pivot bolt (15) brake pedal return spring
(13) rear brake pedal
15. Fill the crankcase with transmission oil (page 49).
(11)
(12)
(15)
(11)
(14)
(13)
(10)
(9)
9. Apply oil to a new O-ring (9) and install it in
the groove of the clutch cover (10).
10. Install the cover by tightening the five cover
bolts in a crisscross pattern in two or three
steps to the specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
14. Install the pivot bolt with the washer (14) and
tighten the pivot bolt to the specified torque:
27 lbf·ft (36 N·m, 3.7 kgf·m)
Connect the brake pedal return spring (15) if
it is removed.
Loading ...
Loading ...
Loading ...