Loading ...
Loading ...
Loading ...
- 18 -
The range hood is designed to work with
several different blower models. Before
using, the control must first be programmed
to your blower model, in order to achieve
proper operating speeds.
From the chart below:
1. Find the SETUP number that
corresponds to the blower model that is
installed with your range hood.
2. The control is factory-preset to SETUP
3. If your blower model is listed under
SETUP 3, no programming is required
and the range hood is ready to use.
SETUP SETUP SETUP
(default)
BLOWER
MODEL
NUMBER
EB6
ILB3
ILB6
EB12
EB15
ILB9
EB9
ILB11
3. To program blower models listed under
SETUP 1 and 2:
A) Power must be supplied to the
hood. The blower and lights must be
turned off.
B) Press and hold
for 5 seconds.
+
+
will flash 3
times. After 1 second, ,
or will light up to indicate the
current setting.
C) Select the proper SETUP for your
blower from the chart at left. Press
, or to select the
proper SETUP. Then press to
confirm and store the new setting.
D) The range hood is now ready to use.
EXTERNAL BLOWER
PROGRAMMING MODE PROCEDURE (WC35E)
Light
Switch
Blower
On / Off
Blower
Speed 2
Time
Delay
FIG. 26
Blower
Speed 3
Blower
Speed 4
Filter
Reset
Loading ...
Loading ...
Loading ...