Loading ...
Loading ...
Loading ...
- 11 -
INSTALL MOUNTING
BRACKETS
DUCTED and NON-DUCTED HOODS
1. Construct wood wall framing that is flush
with interior surface of wall studs. Fig. 6.
Make sure:
a) the framing is centered over installa-
tion location.
b) the height of the framing will allow the
mounting brackets to be secured
to the framing within the dimensions
shown.
2. After wall surface is finished, secure
the mounting brackets to framing with (4)
4.8 x 38 mm mounting screws. See chart
below for mounting bracket location.
Notes:
a. Minimum hood distance above cook top must not be less than 24”. A maximun of 30” above
cook top is highly recommended for best capture of cooking impurities. Distances over 30”
are at the installer and user’s discretion; and if ceiling height and flue length permit.
b. Requires optional 10’ flue extension, ducted model AEWC345
IQSB or non-ducted model
AEWC345IQSBN.
HOOD DISTANCE ABOVE 36” HIGH COOK TOP (see note below)
30”
MOUNTING BRACKET CENTER HOLE LOCATION ABOVE 36” HIGH COOK TOP
CEILING
HEIGHT
8 FEET
24” 25” 26” 27” 28” 29”
37-7/8” 38-7/8” 39-7/8” 40-7/8”
9 FEET
41-7/8”
42-7/8” 43-7/8”
DUCTED
NON-DUCTED
DUCTED OR
NON-DUCTED
DUCT
METHOD
37-7/8” 38-7/8” 39-7/8” 40-7/8”
40-7/8” 41-7/8”
42-7/8” 43-7/8”
10 FEET (see note b.)
39-7/8” 40-7/8” 41-7/8”
42-7/8” 43-7/8”
37-7/8” 38-7/8”
INSTALL CENTER BRACKET
1. Install center bracket using (4) M4x8
screws. Fig. 7.
FIG. 7
(4) M4x8
SCREWS
CENTER
BRACKET
41-7/8”
42-7/8” 43-7/8”
WOOD CROSS
SUPPORT BEHIND
DRYWALL
DRYWALL
FIG. 6
FRAMING
BEHIND WOOD
CROSS SUPPORT
CENTERLINE
3-1/2”
3-1/2”
2-3/16”
---
---
---
Loading ...
Loading ...
Loading ...