Loading ...
Loading ...
Loading ...
- 16 -
INSTALL FILTERS
DUCTED AND NON-DUCTED HOODS
1. To remove the GREASE filter, pull down
latch tab to disengage the filter from the
hood. Tilt the filter downward and remove.
Fig. 23.
2. To install the GREASE filter, align rear filter
tabs with slots in the hood. Pull down latch
tab, push filter into position and release.
Make sure the filter is securely engaged
after installation. Fig. 24.
NOTE: Prior to use, remove protective film
from the filter frame.
NON-DUCTED HOODS ONLY
1. To remove the CHARCOAL filter, grip and
push filter tab toward rear of hood. Pull the
filter down to disengage the rear filter tabs.
Fig. 23.
2. To install the CHARCOAL filter, align filter
in rectangular opening. Push filter against
springs in rear of hood and press into place.
Make sure the filter is securely engaged
after assembly.
3. Install GREASE filter after charcoal filter
is installed.
FIG.23
FIG.24
Loading ...
Loading ...
Loading ...