Loading ...
2
Installation and Wiring
Installer Manual 2
Thermostat Location
Install the thermostat approximately 5 feet (1.5m) above the floor in an area that has a good amount of air
circulation and maintains an average room temperature.
Avoid installation in locations where the thermostat can be affected by drafts, dead air spots, hot or cold air
ducts, sunlight, appliances, concealed pipes, chimneys and outside walls.
Warning
Disconnect power before beginning installation.
Install your new Braeburn thermostat in 4 basic steps:
1 Install the sub-base 3 Connect your wires
2 Provide Power 4 Attach the thermostat to the sub-base
Install the Sub-Base:
• Remove the sub-base from the body of the thermostat.
• Mount the sub-base as shown below:
UP
UP
Drill 3/16” pilot holes
in your desired location.
Use supplied anchors for
drywall or plaster.
1
Loading ...
Loading ...
Loading ...