Loading ...
Loading ...
Loading ...
74
Your Longines Legend Diver Watch has 2 crowns, A and
DIVER
, which can be used for speci c functions ( g.
).
Shows the hours, minutes, seconds and date and also enables the
user to check his or her diving time.
Crown A: 3 positions
Adjusting the time and stop seconds
Unscrew crown A and pull it out to position 3. The seconds hand
will now stop. Adjust the time by turning the crown in either direction.
Synchronise your watch with a time signal (telephone, radio, TV) and
then push the crown A back in to position 1, and screw in rmly.
Adjusting the date
Unscrew crown A and pull it out to the intermediate position 2.
Turn it forwards until it shows the desired date. Push crown A
back in to position 1 and screw in rmly.
DIVER
screw-in crown
Verifying your diving time
Unscrew the
DIVER
crown. When you start diving turn the rotating
bidirectional ring to adjust the needle to the minute hand. Push the
crown back in again and then screw in rmly ( g.
).
You can read off your diving time from the minute hand on the
graduations of the rotating bidirectional ring ( g.
).
The example shows: 15 minutes diving time.
L633, L888
Diver Date
Hour hand
Bi-directional rotating
ange
Minute hand
Stop/start crown for
the bi-directional
rotating ange
3-position
crown
Date aperture
Seconds hand
1
2
3
A
L633, L888 – DIVER DATE Automatic watches
DIVER
Book_I.indb 74 13.08.19 10:56
Loading ...
Loading ...
Loading ...