Arendo 304350 User Manual

Loading ...

32 English

5.6 "AUTOSTART" - funcon

Using this funcon, you can pre-program the appliance to a desired me, so that

your appliance keeps the water or tea ready, e.g. in the morning for breakfast.

Fill the appliance with either water or tea and water. Always note the respecve

maximum lling levels.

To do this, press the "AUTOSTART" buon (1) unl the blue status ring of the

buon starts glowing.

The display now changes to the programming overview, which is indicated by the

small clock symbol at the top of the display.

In addion, two mes are shown on the display. On the le is the

"CURRENT TIME", which represents the present me. On the right, you can see

the "START TIME" which represents the switch-on me.

To adjust the mes, press and hold the "AUTOSTART" buon (1) for 2 seconds.

The "CURRENT TIME / START TIME" indicators start ashing in the display.

The appliance now waits 20 seconds for your input. If there is no input during this

me, the appliance switches o and you will have to start the process again.

Now adjust the current me. To do this, use the "UP / DOWN" buons of the indi-

vidual temperature seng (12), then the switch-on me using the "UP / DOWN"

buons of the individual me seng (13).

When programming, pay aenon to the 12-hour AM/PM classicaon (AM

=midnight to noon / PM = (12 noon to midnight).

Close or acvate the "AUTOSTART" funcon by pressing the "ON/OFF" buon (6).

If the programming of the AUTOSTART funcon is successful, the status rings of

the "AUTOSTART" (1) and "ON/OFF" (2) buons glow connuously.

Loading ...

Arendo 304350 Water Kettle