Arendo 304350 User Manual

Loading ...

29English

5. Usage

5.1 Boiling water

Turn the lid (8) counter-clockwise to the le to open it. Fill the kele with cold

water and replace the lid.

Note: A scale is provided on the outside. Do not ll the container above the max-

imum mark. The boiling water may spurt out if the kele is overlled. Make sure

that the total quanty of water is only 1 l when brewing tea. The minimum quanty

of water is 500 ml. When boiling water normally, the maximum quanty of water

is 1.7 l. Then place the kele on the base plate.

Next to the display on the base staon, buons are provided for selecng dierent

water temperatures and for selecng the desired tea brewing me. Press the "Up"

and "Down" buons of the individual temperature seng (12) and the individual

me seng (13) to make the desired sengs. You can nd out more about making

tea in the chapter "Boiling tea".

Press the "ON/OFF" buon to start the boiling funcon subsequently. As soon as

the water reaches the set temperature, the kele switches o and you hear two

beeps. Please remember that the boiling process may be interrupted briey below

100°C by intermediate measurements. Please wait unl the boiling process is n-

ished. That is conrmed by the audible signal. The heang element switches o

automacally and the boiling process is stopped. The appliance can now be lied

and the water can be used.

5.2 Boiling tea

Remove the tea sieve from the kele and ll it with the desired amount of tea. An

example for lling can be found in the table below:

Filling capacity Cups / teaspoon

500 ml approx. 2 cups / 2 teaspoons of tea

750 ml approx. 3 cups / 3 teaspoons of tea

1 l approx. 4 cups / 4 teaspoons of tea

Loading ...

Arendo 304350 Water Kettle