Loading ...
Loading ...
Loading ...
4. Configure the date and time settings.
●
While the seconds are flashing,
pressing (E) will reset them to 00. 1 is
added to the minutes when the current
seconds count is between 30 and 59
seconds.
●
For all the other settings, use (B) and (E)
to change the flashing setting.
5. Repeat steps 3 and 4 to select time and
date settings.
6. Press (A) to exit the setting screen.
Selecting UTC (Coordinated
Universal Time) as Your
Home City
Pressing (B) and (E) at the same time will set
UTC (Coordinated Universal Time) as the
Home City and display its current time.
Switching between 12-hour
and 24-hour Timekeeping
You can specify either 12-hour format or 24-
hour format for the time display.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
Home City
3. Press (D) eight times.
This causes [12H] or [24H] to flash on the
display.
4. Press (E) to select [12H] (12-hour
timekeeping) or [24H] (24-hour
timekeeping).
24-hour
timekeeping
12-hour
timekeeping
5. Press (A) to exit the setting screen.
Changing the Date Display
Format
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
Home City
3. Press (D) nine times.
This displays a screen for selecting the
date display format.
4. Press (E) to select a date display format.
M: Month
DD: Day
5. Press (A) to exit the setting screen.
Specifying the Day of the
Week Language
You can select any one of six languages for
the day of the week display in the Timekeeping
Mode.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
Home City
3. Press (D) 10 times.
This causes the language setting to flash.
4. Use (E) to select a language.
[ENG]: English
[ESP]: Spanish
[FRA]: French
[DEU]: German
[ITA]: Italian
[PyC]: Russian
5. Press (A) to exit the setting screen.
Operation Guide 5631
15
Loading ...
Loading ...
Loading ...