Nissan 2021 SENTRA S XTRONIC CVT®

User Manual - Page 57

For 2021 SENTRA S XTRONIC CVT.

PDF File Manual, 548 pages, Read Online | Download pdf file

2021 SENTRA S XTRONIC CVT photo
Loading ...
Loading ...
Loading ...
10. If the child restraint is installed in the
front passenger seat, place the ignition
switch in the ON position. The front
passenger air bag status light
should illuminate. If this light is not illu-
minated, see “Front passenger air bag
and status light” (P. 1-54). Move the child
restraint to another seating position.
Have the system checked. It is recom-
mended that you visit a NISSAN dealer
for this service.
After the child restraint is removed and the
seat belt is fully retracted, the ALR mode
(child restraint mode) is canceled.
Installing top tether strap
The child restraint top tether strap must be
used when installing the child restraint with
seat belts.
First, secure the child restraint with the seat
belt.
Rear bench seat
OUTBOARD AND CENTER SEATING
POSITIONS
1. Position the top tether strap
O
1
over the
seatback.
2. Secure the tether strap to the tether an-
chor point
O
2
as shown.
3. Tighten the tether strap according to
the manufacturer’s instructions to re-
move any slack.
If you have any questions when install-
ing a top tether strap, it is recommended
that you visit a NISSAN dealer for this
service.
WARNING
Child restraint anchorages are de-
signed to withstand only those loads
imposed by correctly fitted child re-
straints. Under no circumstances are
they to be used to attach adult seat
belts, or other items or equipment to
the vehicle. Doing so could damage the
child restraint anchorages. The child
restraint will not be properly installed
using the damaged anchorage, and a
child could be seriously injured or killed
in a collision.
LRS0865
Forward-facing step 10
LRS3283
Rear seats
1
Top tether strap
2
Anchor point
Safety-Seats, seat belts and supplemental restraint system 1-39
Loading ...
Loading ...
Loading ...