Loading ...
Loading ...
Loading ...
When power window switch does
not operate
If the power window automatic function
(closing only) does not operate properly,
perform the following procedure to initial-
ize the power window system:
1. Place the ignition switch in the ON
position.
2. Open the window more than halfway by
operating the power window switch.
3. Pull the power window switch and hold it
to close the window, and then hold the
switch more than 3 seconds after the
window is closed.
4. Release the power window switch. Op-
erate the window by the automatic
function to confirm the initialization is
complete. The power window automati-
cally opens or closes depending on if the
automatic down or up function is
selected.
5. Perform steps 2 through 4 above for
other windows.
If the power window function does not op-
erate properly after per forming the above
procedure have the system checked and
repaired. It is recommended that you visit a
NISSAN dealer for this service.
POWER MOONROOF
The moonroof will only operate when the
ignition switch is placed in the ON position.
The power moonroof is operational for a
period of time, even if the ignition switch is
placed in the AUTO ACC or OFF position. If
the driver's door is opened during this pe-
riod of time, the power to the moonroof is
canceled.
Sliding the moonroof
To fully open or close the moonroof, push
the switch to the open
O
1
or closed
O
2
position and release it; it need not be held.
LIC4249
MOONROOF (if so equipped)
Instruments and controls 2-69
Loading ...
Loading ...
Loading ...