Loading ...
Loading ...
Loading ...
A Shooting with the LCD Monitor
200
You can display the histogram by pressing the <B> button. However,
the histogram is not displayed while pressing the shutter button
completely.
When <g> is displayed in white, it indicates that the Live View image
is displayed at the brightness level closely matching that of the actual
image to be captured.
If <g> is blinking, it indicates that the Live View image is displayed at
a brightness that differs from the actual shooting result because of low-
or bright-light conditions. However, the actual image recorded will reflect
the exposure setting. Note that the noise may be more noticeable than
the actual image recorded.
Exposure simulation is not performed in <8: FG> modes, when
Multi Shot Noise Reduction is set, when flash is used, or when bulb
exposure is used. The <g > icon and histogram will be displayed in
gray. The image is displayed on the LCD monitor with standard
brightness. Also, the histogram may not be properly displayed in low- or
bright-light conditions.
The <g> icon will also be displayed in gray in the <v:
ABCD> modes. The histogram will not be displayed.
Do not hold the camera in the same position for long periods of time.
Even if the camera does not feel too hot, prolonged contact with the same
body part may cause skin redness or blistering due to low-temperature
contact burns. Using a tripod is recommended when using the camera in
very hot places or for people with circulation problems or poor skin
sensation.
Loading ...
Loading ...
Loading ...