Loading ...
Loading ...
Loading ...
D Using the Built-in Flash
184
Set the flash exposure compensation if the brightness of the subject
does not come out as desired (so you want to adjust the flash output) in
flash photography. You can set the flash exposure compensation up to
±2 stops in 1/3-stop increments.
1
Select [Flash control].
Under the [z2] tab, select [Flash
control], then press <0>.
2
Select [Built-in flash settings].
3
Select [2exp. comp.].
4
Set the compensation amount.
If the exposure is too dark, press the
<Z> key (for increased exposure).
If the exposure is too bright, press the
<Y> key (for decreased exposure).
X When you press the shutter button halfway, the <y> icon will
appear in the viewfinder.
After taking the picture, cancel the flash exposure
compensation by setting it back to 0.
3 Flash Exposure CompensationN
Loading ...
Loading ...
Loading ...