Loading ...
Loading ...
Loading ...
Installation
52
Once this has been done, fix the appliance
into position using the special brackets
provided (A) so that it is perfectly level,
following the instructions in the figure.
This appliance can also be installed in a
90 cm base.
To fit the brackets, the appliance must be
inserted into the opening made in the
countertop, with the edge resting on the
actual top.
To fasten the hob laterally, just fix the two “L”
brackets to the sides of the carcase (2)
using the supplied screws (4) making sure
to align the slot (3) on the bracket with the
rivet (1) on the bottom of the product.
Stabilise the hob fastening by tightening the
screw (5) in the rivet (1).
The brackets should be positioned
only after having placed the hob
on the seal.
• If possible, do not use silicone to
fix the hob as this would make it
impossible to remove the hob
without damaging it.
• If a laminated worktop is used, it
is recommended to apply a
waterproofing primer to the
recess.
• When fastening this appliance
to the support structure, you are
advised not to use mechanical
or electrical screwdrivers and to
exert moderate pressure
manually on the fastening
hardware.
• Use the supplied brackets in all
the fixing points.
Loading ...
Loading ...
Loading ...