Loading ...
Loading ...
Loading ...
EMPTYING THE WASTE WATER
TANK
1. Empty the WASTE WATER TANK before
the dirty water reaches the “Full Line”
(Fig. 11).
2.
POWER SWITCH into the middle setting.
3. Remove the WASTE WATER TANK from
the machine by gripping the tank HANDLE
and lifting straight up. (Fig. 12)
4. Unscrew the WIDE OPENING LID and pour
out the dirty water. DO NOT open the
black rubber tool vacuum connection flap
(Fig. 13). Dirty water should be poured
into a toilet or outside drain, do not pour
into sink or bathtub/shower.
5. Rinse the inside of the WASTE WATER
TANK and replace the WIDE OPENING
LID, firmly tighten the lid.
6. Place the tank back on the machine by
setting is straight down on the base until it
is secure. (Fig. 14)
REFILLING THE CLEAN WATER
TANK
1. When the unit no longer sprays water out
of the sides of the machine, check the
CLEAN WATER TANK to see if it’s empty.
2. If the CLEAN WATER TANK is empty, turn
POWER
SWITCH into the middle setting.
3. Remove the CLEAN WATER TANK by
gripping the TANK HANDLE and lifting
straight up. (Fig. 15)
4. Loosen the TANK LID by turning anti-
clockwise and remove from the machine,
set aside (Fig. 16). Fill the tank with hand
hot tap water to the “CLEAN WATER FILL
LINE”. Use luke warm water on wool/
wool mix carpets. DO NOT BOIL OR
MICROWAVE WATER.
HOW TO CLEAN / FEATURES (CONT.)
(Fig 11)
(Fig 14)
(Fig 15)
(Fig 12)
(Fig 13)
8 1800 441 900 rugdoctor.com.au
Loading ...
Loading ...
Loading ...