Loading ...
Loading ...
Loading ...
CLEANING WITH THE HAND TOOL
1. Unwrap the HAND TOOL from the CADDY.
(Fig. 23)
2. Open the TOOL VACUUM CONNECTION
by pulling open the black rubber flap.
(Fig. 24)
3. Insert the HAND TOOL vacuum connection
horizontally into the WASTE WATER PORT
on the front of the WASTE WATER TANK
by lining up the “O” icons on the tank and
the TOOL. If there is any problem fitting
this in it is only because it is not being
pushed in at the correct angle. (Fig. 25)
4. Lock the TOOL into place by rotating to
the right, the icon will be straight up.
(Fig. 26)
5. With the machine handle tilted as far back
as possible to allow easy access, connect
the red braided hose connector to the
“TOOL SPRAY CONNEC
TION” located on
the side of the top of the machine. The
O-ring on new machines can be a tight fit
so you may need to wiggle it from side-
to-side while pushing firmly down in order
to ease the coupling into the connection.
Lock the tool into place by rotating
clockwise. After a few uses the connection
will ease up. (Fig. 27)
6. You’re now ready to deep clean your
upholstery, mattresses, stairs, fabric
vehicle interiors and carpet spots and
stains. Turn the machine on by pressing
the POWER SWITCH down toward the
“TOOL” setting. (Fig. 28)
(Fig 23)
(Fig 24)
(Fig 25)
(Fig 26)
(Fig 27)
(Fig 28)
HOW TO CLEAN / FEATURES
1
2
3
11
rugdoctor.com.au 1800 441 900
Loading ...
Loading ...
Loading ...