Loading ...
Loading ...
Loading ...
HOW TO CLEAN / FEATURES (CONT.)
CLEANING WITH THE HAND TOOL
(CONT)
7. Position the HAND TOOL well in front of
the area or stain you want to deep clean.
8. Squeeze the “SPRAY” trigger on the
handle to begin cleaning. (Fig. 29)
9. While squeezing the trigger, move the tool
back and forth over the area you want to
clean, making sure to press the suction
nozzle down into the surface. (Fig. 30)
10. Release the “SPRAY” trigger when area
is cleaned. Excess water can be removed
by making additional passes with the tool
without squeezing the “SPRAY” trigger.
This may allow faster drying.
11. Leave the machine on for 15 seconds
after cleaning to allow for all of the dirty
solution to be collected into the WASTE
WAT
ER TANK.
EMPTYING THE WASTE WATER
TANK
See instruction on Page 8
REFILLING THE CLEAN WATER
TANK
See instruction on Page 8
STORING THE UPHOLSTERY TOOL
ON THE TOOL CADDY
1. The Tool Caddy is labelled so you can
wrap the upholstery tool hose securely
for storage. See the comprehensive
instructions on wrapping the tool caddy
on page 5. (Fig. 31)
2. The TOOL CADDY can be easily removed
and replaced on the unit. Simply lift up to
remove. To replace back on the unit, align
the connection hooks on the back with
the connection inlets on the back of the
HANDLE and push down to secure.
(Fig. 32)
CLEANING UP/STORAGE AFTER USE
After you’ve used your RUG DOCTOR DEEP
CARPET CLEANER Upholstery Tool follow
these easy steps for quick clean-up and
storage for your machi
ne.
1.
POWER SWITCH down toward the “OFF”
setting.
2.
the MAINS POWER CABLE from the mains
socket and wrap it around the ROTATING
CABLE HOOKS.
(Fig 29)
(Fig 30)
(Fig 31)
(Fig 32)
12 1800 441 900 rugdoctor.com.au
Loading ...
Loading ...
Loading ...