Loading ...
Loading ...
Loading ...
SETTING UP/GETTING READY TO
CLEAN USING THE HAND TOOL
1. Position the FOLD DOWN HANDLE as far
back as possible to allow easy access to
the TOOL SPRAY CONNECTION.
2. Fill the CLEAN WATER TANK:
a. Remove the CLEAN WATER TANK by
gripping the tank HANDLE and lifting
straight up. (Fig. 20)
b. Loosen the TANK LID by turning
anti-clockwise and remove from the
machine, set aside.
c. Fill the tank with hand hot tap water
to the “CLEAN WATER FILL LINE”. Use
luke warm water on wool/wool mix
fabrics.
DO NOT USE BOILED OR MICROWAVED
WATER IN TANK.
d. The TANK LID is also the “Carpet
detergent/fabric cleaner” measure.
Fill the lid with upholstery cleaning
solution to the 120ml mark. (Fig. 21)
e.
Pour the upholstery cleaning solution into
the CLEAN WATER TANK and replace the
lid.Turn clockwise to tighten.
f. Place the CLEAN WATER TANK back in
the machine, making sure it is secure.
3. Rotate the CABLE WRAP HOOK on the
handle to release the mains power cable.
Unwrap the MAINS POWER CABLE and
plug in to a mains socket. Making sure the
POWER SWITCH is in the “OFF” (middle)
position. (Fig. 22)
GETTING READY TO CLEAN UPHOLSTERY,
MATTRESSES, STAIRS, VEHICLE INTERIORS AND
FRESH STAINS, USING THE HAND TOOL
DO NOT USE BOILED OR MICROWAVED WATER IN TANK. Doing so could
result in scalding or burns and damage to the machine. ALWAYS CHECK FOR
COLOURFASTNESS. Do not overwet the carpet. Use luke warm water on wool
and wool blend carpets. DO NOT USE on natural fibre, silk or pure wool oriental
rugs, hand loomed wool rugs, braided rugs, sisal, sea grass matting or jute
carpets, silk, haitian cotton, brushed corduroy, leather, non colourfast fabrics,
damage material and void warranty on machine. Do not walk on wet carpet.
(Fig 20)
(Fig 21)
(Fig 22)
10 1800 441 900 rugdoctor.com.au
Loading ...
Loading ...
Loading ...