Loading ...
Loading ...
Loading ...
173
Reference
13
Troubleshooting Guide
The CF card is not properly loaded.
s
Load the CF card properly. (→p.28)
The CF card is full.
s
Use a new CF card or erase unnecessary images. (→p.28, 117)
The battery is exhausted.
s
Recharge the battery. (→p.22)
You did not focus well. (The focus confirmation light in the viewfinder blinked.)
s
Press the shutter button halfway and focus the subject. If you still
cannot focus properly, focus manually. (→p.30, 71)
The LCD monitor screen is dirty.
s
Use a soft cloth to clean the screen.
The LCD’s service life has expired.
s
Contact your dealer or Canon Service Center.
The lens focus mode switch is set to <MF> or < M>.
s
Set the lens focus mode switch to <AF >. (→p.27)
Camera shake occured when you pressed the shutter button.
s
To prevent camera shake, hold the camera still and press the shutter
button gently. (→p.30, 36)
The data in the CF card is damaged.
s
Format the CF card. (→p.119)
s
Use the correct CF card. (→p.6, 175)
The image cannot
be erased.
The image is protected.
s
Cancel the protection first. (→p.116)
The date and time
is wrong.
The correct date and time has not been set.
s
Set the correct date and time. (→p.154)
No images can be
shot or recorded.
The LCD monitor
does not display a
clear image.
The image is out
of focus.
The CF card
cannot be used.
The date/time battery is exhausted.
s
Replace the battery with a new one. (→p.155)
The message
“ ” appears
on the LCD panel
No image
appears on the
TV screen
Video cable plugs are not inserted fully.
s
Insert the video cable plugs firmly all the way. (→p.115)
The correct video format (NTSC or PAL) has not been set.
s
Set the camera to the correct video format to match the TV set.
(→p.144)
Shooting
Image Review
Loading ...
Loading ...
Loading ...