Loading ...
Loading ...
Loading ...
13
FlexInduction
®
Cooking Zone
You can combine the elements into a large cooking zone
as needed or use two elements that are independent of
one another.
The FlexInduction
®
cooking zone consists of 4 inductors,
which are controlled independently of one another. When
FlexInduction
®
is in use, only the area is activated that is
covered by cookware.
Cookware use recommendations
Place the cookware in the middle. This assures optimal
pot detection and heat distribution.
As two independent cooking zones
The flexible cooking zone is used like two independent
cooking zones.
Turning on
See section on
As a single cooking zone
Using the entire cooking zone by connecting both
individual zones.
Linking the two cooking zones
The cooktop must be turned on.
1.
Set down the cookware. Select one of the two cooking
zones assigned to the flexible cooking zone and set
the power level.
2.
Touch the flex join/split key. The display lights up.
The heat setting appears in the display for the lower
cooking zone.
The flexible cooking zone is activated.
Changing the power level
Select one of the zones in the flexible cooking zone and
change the power level in the settings area.
Add another piece of cookware
Set the new item of cookware down on the cooktop,
select one of the two cooking zones in the flexible
cooking zone and then touch the flex join/split touch key
twice. The new item of cookware will be detected and the
power level that was previously selected will be retained.
Note: If the cookware is moved from the cooking zone
being used or lifted up, the cooking zone begins an
automatic search and the heat setting selected
previously is retained.
Separating the two cooking zones
Select one of the two cooking zones in the flexible
cooking zone and touch the flex join/split touch key.
This deactivates the flexible cooking zone. The two
cooking zones will now function independently.
Notes
▯ If the cooking zone is switched off, and then switched
back on again later, the flexible cooking zone is reset
to function as two independent cooking zones.
▯ To change the configuration settings for the flexible
cooking zone, refer to the section on ~ "Basic
settings"
Deep fat frying** (in 1-2 qt. oil)
deepfrozen foods, e.g. chicken nuggets (0.5lb per serving) 8.0- 9.0
other, e.g. doughnuts (0.5lb per serving) 4.5- 5.5
Keep warm
tomato sauce 1.5
* ongoing cooking without lid
** without lid
Power levels
Flexible cooking zone - as an individual element
Diameter of the cookware max. 5X"
(13cm)
Place the cookware on one of the
4 positions visible in the figure.
Diameter larger than 5X" (13cm)
Place the cookware on one of the
3 positions visible in the figure.
If the cookware takes up more than
one element, place it on the upper or
lower edge of the flexible cooking
zone.
Flexible cooking zone - two independent elements
The front and rear elements with two
inductors apiece can be used inde-
pendently. The heat setting is set indi-
vidually for each element. Use only
one piece of cookware on each ele-
ment.
Loading ...
Loading ...
Loading ...