Loading ...
Loading ...
Loading ...
Setting Up
EZ-220 Owner’s Manual
11
When battery power becomes too low for proper oper-
ation, the volume may be reduced, the sound may be
distorted, and other problems may occur.
When this happens, make sure to replace all batteries
with new ones or already-recharged ones.
To turn on the power, press the [ ] (Standby/On)
switch. To turn off the instrument, press and hold the
[ ] (Standby/On) switch again for more than a sec-
ond.
To prevent unnecessary power consumption, this
instrument features an Auto Power Off function that
automatically turns the power off if the instrument is
not operated for approximately 30 minutes. If you do
not want to use the Auto Power Off function, disable
the function as described below. Please note that the
setting will be restored to the default setting of “on”
whenever the power is turned on.
Disabling or enabling the Auto Power Off Set-
ting
1 Press the [FUNCTION] button repeatedly until
“AutoOff” appears in the display.
2 Set the value “oFF” (disable) or “on” (enable) by
pressing the [+] and [-] buttons.
Default setting: on
Disabling Auto Power Off (simple method)
Turn the power on while holding down the lowest key on the
keyboard. An “oFF AutoOff” indication appears briefly and
Auto Power Off is disabled.
Any pair of stereo headphones with a 1/4” stereo
phone plug can be plugged in here for convenient
monitoring. The speakers are automatically shut off
when a plug is inserted into this jack.
The PHONES/OUTPUT jack also functions as an
external output. You can connect the PHONES/OUT-
PUT jack to a keyboard amplifier, stereo system or
other line-level audio device to send the instrument’s
output signal to that device.
• This instrument cannot charge the batteries. Use only the
specified charger device when charging.
• Power will be automatically drawn from the AC adaptor if an
AC adaptor is connected while batteries are installed in the
instrument.
Turning the power on/off
• Even when the power switch is turned off (the display is
blank), electricity is still flowing to the product at the minimum
level. When you are not using the product for a long time,
make sure to unplug the power cord from the wall AC outlet,
and remove all the batteries from the instrument.
Auto Power Off
NOTE
NOTE
CAUTION
• Depending on the instrument status, the power may not
turn off automatically, even after the specified period of
time elapses. Always turn off the power manually when the
instrument is not in use.
• When the instrument is not operated for a specified period
of time while connected to an external device such as an
amplifier, speaker or computer, make sure to follow the
instructions in the Owner’s Manual for turning off the
power to the instrument and the connected devices, in
order to protect the devices from damage. If you do not
want the power to turn off automatically when a device is
connected, disable Auto Power Off.
Connecting headphones and
external audio equipment
• Do not use the instrument/device or headphones for a
long period of time at a high or uncomfortable volume
level, since this can cause permanent hearing loss. If you
experience any hearing loss or ringing in the ears, con-
sult a physician.
• Before connecting the instrument to other electronic
components, turn off the power for all components.
Before turning the power on or off for all components, set
all volume levels to minimum.
• When the instrument’s sound is output to an external
device, first turn on the power to the instrument, then to
the external device. Reverse this order when you turn the
power off.
NOTICE
CAUTION
NOTICE
Loading ...
Loading ...
Loading ...