CMS4601NX User Manual

Loading ...

ADJUSTING THE COFFEE MILL

The coee mill is preset in the factory and should not require

adjusting. However, if after making the rst few coees you nd

that delivery is either too fast or too slow (a drop at a time), this

can be corrected by adjusting the grinding adjustment knob (g.

14).

Important! The grinding adjustment knob must only

be turned when the coee mill is in operation.

For slower delivery and creamier coee, turn one click anticlock-

wise (ner pre-ground coee).

For faster delivery (not a drop at a time), turn one click clockwise

(coarser pre-ground coee).

PREPARING COFFEE WITH PRE

GROUND COFFEE INSTEAD OF

BEANS

• Pressthe (B4) icon (g. 8) and select the pre-ground

coee function.

• Extractthemachinebypullingitoutwardsusingthehan-

dles (g. 7).

• Liftthecentrallid,placeonemeasureofpre-groundcoee

in the funnel (g. 19), push the appliance in then proceed

as described in the section “Making coee using coee

beans”.

N.B.: You can make just one coee at a time by pressing the

icon (B10) (g. 12).

• Afterusingthemachinewithpre-groundcoee,togoback

to making coee using beans, deactivate the pre-ground

coee function by pressing the icon (B4) (g. 8).

NOTE 1: Never introduce pre-ground coee when the machine is

o or it could spread through the inside of the appliance.

NOTE 2: Never add more than 1 measure, otherwise the appli-

ance will not make the coee.

NOTE 3: Use the measure provided only.

NOTE 4: Introduce only pre-ground coee for espresso coee

machines into the funnel.

NOTE 5: If more than one measure of pre-ground coee is used

and the funnel clogs, push the coee down with a knife (g. 21)

then remove and clean the brewing unit and machine as de-

scribed in the “Cleaning the brewing unit” section.

DELIVERING HOT WATER

• Alwaysmakesuretheapplianceisready.

• Turnthecappuccinomakeroutwardsandplaceacontainer

underneath (g. 6).

• Pressthe icon (B13) (g. 20). The appliance displays:

“HOT WATER PRESS OK”. Press the OK icon (B9) again and

hot water is delivered from the cappuccino maker into the

container underneath. (You should not deliver hot water

for more than 2 minutes at a time). To interrupt, press the

icon (B13) or the icon (B6). The appliance stops

delivery once the set quantity is reached.

CHANGING THE QUANTITY OF HOT

WATER

The machine is set by default to automatically delivery 200 ml

of hot water.

To change these quantities, proceed as follows:

• Placeacontainerunderneaththecappuccinomaker(g.5).

• PresstheMENU(B2)toenterthemenu(g.15)orpressthe

icons (B7) and (B8) (g. 2) until “PROGRAM HOT

WATER” is displayed.

• PresstheOKicon(B9)toconrm.

• Select the required quantity of water by pressing the

icons (B7) and (B8). The progress bar shows the

quantity of water selected.

• PresstheOKicon(B9)toconrm(orthe icon (B6) to

cancel the operation.

• Pressthe icon (B6) (g. 18) twice to exit the menu.

• Theapplianceisnowreprogrammedwiththenewsettings

and is ready.

MAKING CAPPUCCINO

N.B.: Set the quantity of coee you want to use to make

the cappuccino in the “Program cappuccino” function in the

menu.

• Selectthetasteofthecoeeyouwanttousetomakethe

cappuccino by pressing the icon (B4).

• Removethelidofthemilkcontainer.

• Fillthecontainerwithabout100gramsofmilkforeach

Loading ...

User Manual - Page 8