CMS4601NX User Manual

Loading ...

12 13

Changing coee temperature

To change coee temperature, proceed as follows:

• PresstheMENUicon(B2)toenterthemenuandthenthe

icons (B7) and (B8) until “TEMPERATURE” is dis-

played.

• PresstheOKicon(B9).

• Pressthe icons (B7) and (B8) to select the required

coee temperature from low, medium and high.

• PresstheOKbutton(B9)toconrmthetemperatureselect-

ed.

• Pressthe icon (B6) to exit the menu.

Setting water hardness

The operating period can be extended if required, making desca-

ling less frequent by programming the machine on the basis of

the real lime content in the water used.

Proceed as follows:

• removethe“TotalHardnessTest”strip(attachedtopage2)

from its packaging then dip it fully in the water for a few

seconds,

Then remove and wait about 30 seconds (until it changes

colour and forms red squares).

• turn the appliance on by pressing the ON/OFF/stand-by

button (A7).

• PresstheMENUicon(B2)toenterthemenuandthenthe

icons (B7) and (B8) until “WATER HARDNESS” is dis-

played.

• PresstheOKicon(B9).

• Pressthe icons (B7) and (B8) until the number co-

incides with the number of red squares on the test strip (for

example, if there are 3 red squares on the test strip, select

the message “WATER HARDNESS 3”

• PresstheOKicon(B9)toconrm.

The coee maker is now programmed to provide the des-

cale warning when actually necessary.

Programming coee

For instructions on programming coee, see the “CHANGING THE

QUANTITY OF COFFEE IN THE CUP” section.

Programming cappuccino

For instructions on programming cappuccino, see the section

“CHANGING THE QUANTITY OF MILK AND COFFEE FOR CAPPUC-

CINO”.

Programming the jug

This function is not supported by this model.

Programming water

For instructions, see the “CHANGING THE QUANTITY OF HOT WA-

TER” section.

Descaling

Important! Descaler contains acids.

Respect the safety warnings provided by the manufacturer and

given on the descaler pack.

N.B.: Use the descaler recommended by the manufac-

turer only.

Use of other descalers invalidates the guarantee.

Failure to descale the appliance as described also invalidates the

guarantee.

When “PLEASE DESCALE !” is displayed, the machine requires

descaling.

Proceed as follows:

• makesurethemachineisready;

• PresstheMENUicon(B2)toenterthemenuandthenthe

icons (B7) and (B8) until “DESCALE” is displayed.

• PresstheOKicon(B9).

The message “ADD DESCALER PLEASE CONFIRM” is dis-

played.

• Emptythetankofwater,pourthecontentsofthedescaler

bottle into the tank respecting the instructions given on the

descaler pack, then add water.

Position a container with a capacity of about 2 litres under

the hot water spout.

• PresstheOKicon(B9).Descalerowsoutofthehotwater

spout into the container below.

The appliance displays: “DESCALING”.

• Thedescaleprogrammeautomaticallyperformsaseriesof

deliveries and pauses.

• Afterabout30minutes“DESCALECOMPLETEPLEASECON-

FIRM” is displayed.

• PresstheOKicon(B9).“RINSINGFILLTANK”isdisplayed.

• Emptythewatertank,rinsetoeliminatedescalerresidues,

then ll with clean water.

• Replacethetankfullofcleanwater.

“RINSING PLEASE CONFIRM” is displayed again.

• PresstheOKicon(B9)again.

Hot water ows out of the spout into the container below

and “RINSING” is displayed.

• Wait until“RINSING COMPLETE PLEASE CONFIRM” is dis-

played.

• PresstheOKicon(B9).

Loading ...

User Manual - Page 13