CMS4601NX User Manual

Loading ...

6 7

NOTE 2: If the coee is delivered too fast and the cream is not

satisfactory, see the “Adjusting the coee mill” section.

NOTE 3: Tips for a hotter coee:

• Proceedasdescribedinthesection“Changingandsetting

menu parameters”, “Rinse” function.

• Unlesspreheated,donotuseexcessivelythickcupsasthey

will absorb too much heat.

• Preheatthecupsbyrinsingthemwithhotwater.

NOTE 4: Coee delivery can be interrupted at any moment by

re-pressing the previously selected icon which remains lit during

the operation.

NOTE 5: As soon as delivery is nished, to increase the quantity of

coee in the cup, just keep pressing the previously selected icon

within 3 seconds after delivery has nished.

NOTE 6: When the appliance displays “FILL TANK”, ll the tank

with water or the appliance will not deliver coee.

(It is normal for there to be a little water left in the tank).

NOTE 7: After about 14 single (or 7 double) coees, the appliance

displays “EMPTY WASTE COFFEE CONTAINER”.

Even if not full, the empty waste coee container message is dis-

played 72 hours after the rst coee has been delivered. For the

72 hours to be calculated correctly, the machine must never be

turned o with the main switch in the 0 position.

To clean, open the service door on the front of the appliance

by pulling the spout (g. 16), extract the drip tray (g. 17) and

clean.

When cleaning, always extract the drip tray completely.

Important! When extracting the drip tray, the waste

coee container MUST always be emptied.

If this is not done, the machine may be clogged.

NOTE 8: Never extract the water tank while the machine is de-

livering coee.

If it is removed, it will not be possible to make the coee and

the appliance will display “GROUND TOO FINE ADJUST MILL AND

PRESS OK” and then “FILL TANK”. Check the level of water in the

tank and replace in the appliance.

To turn the appliance back on, insert the water spout if not al-

ready in place (g. 6), then press the OK icon (B9). “HOT WATER

PRESS OK” is displayed.

Press the OK icon (B9) within a few seconds and deliver water

from the spout for about 30 seconds. When delivery stops, the

basic modes are displayed again.

N.B.: The coee maker may request the operation to be

repeated a number of times until the air is completely elminated

from the hydraulic circuit.

N.B.: if this operation is not performed correctly or if

the machine is turned o, the basic modes may be displayed,

although the problem is in fact still present.

CHANGING THE QUANTITY OF COF

FEE IN THE CUP

The appliance is set by default to automatically make the follow-

ing types of coee:

• espresso

• smallcup

• mediumcup

• largecup

• mug

To change the quantity, proceed as follows:

• PresstheMENUicon(B2)toenterthemenu(g.15).Press

the icons (B7) and (B8) (g. 2) until “PROGRAM

COFFEE” is displayed.

• PresstheOKicon(B9).

• Selectthetypeofcoeeyouwanttochangebypressing

the icons (B7) and (B8).

• PresstheOK icon (B9) toconrmthe typeofcoeeyou

want to make.

• Usethe icons (B7) and (B8) to change the quantity

of coee. The progress bar shows the quantity of coee se-

lected.

• PresstheOKicon(B9)againtoconrm(orthe icon (B6)

to cancel the operation).

• Pressthe icon (B6) (g. 18) twice to exit the menu.

The appliance is now reprogrammed with the new settings and

is ready.

Loading ...

User Manual - Page 7