Loading ...
Loading ...
Loading ...
4 5
EN
A4. Waste coee container
A5. Brewing unit
A6. Cup tray lights
A7. On/OFF/stand-by button
A8. Control panel
A9. Tray
A10. Hot water and steam nozzle
A11. IEC connector
A12. Water tank
A13. Coee spout (adjustable height)
A14. Drip tray
A15. Bean container lid
A16. Bean container
A17. Grinding adjustment knob
A18. Pre-ground coee funnel door
A19. Measure
A20. Compartment for measure
A21. Pre-ground coee funnel
A22. Power cable
A23. Main switch
Description of the control panel
(page 3 - B)
N.B.! A light touch is enough to activate the icon.
B1. Display: guides the user in using the appliance.
B2. MENU icon to activate or deactivate menu parameter set-
ting mode
B3. icon to turn lights A6 on and o
B4. icon to select the coee taste
B5. icon to select the type of coee (espresso, small cup,
medium cup, large cup, mug)
B6. icon to exit the selected mode
B7-B8. icons to scroll forwards or backwards through the
menu and display the various modes
B9. OK icon to conrm the selected function
B10. icon to deliver a cup of coee
B11. icon to deliver two cups of coee
B12. icon to deliver cappuccino
B13. icon to deliver hot water
Description of milk container and accesso-
ries
(page 3 - C)
C1. Frothed milk regulator
C2. Milk container handle
C3. CLEAN button
C4. Milk intake tube
C5. Frothed milk spout
C6. Milk frother
C7. Hot water spout
PRELIMINARY CHECKS
Controls after transport
After removing the packaging, make sure the product is com-
plete and undamaged and that all accessories are present.
Do not use the appliance if it is visibly damaged.
Contact Customer Services.
Installing the appliance
Important!
• Installationmustbeperformedbyaqualiedprofessional
in compliance with legislation in force in the country of in-
stallation (see Built-in installation).
• Thepackingelements(plasticbags,polystyrenefoam,etc.)
should be kept out of reach of children.
• Donotinstalltheapplianceinroomswherethetempera-
ture may drop to 0°C or lower.
• Customisethewaterhardnessassoonaspossiblefollowing
the instructions in the “Setting water hardness” section.
Connecting the appliance
Danger! Check that the mains power supply voltage
corresponds to the value indicated on the rating plate on the
bottom of the appliance. Connect the appliance to an eciently
earthed and correctly installed socket with a minimum current
rating of 10A only. If the power socket does not match the plug
on the appliance, have the socket replaced with a suitable type
by a qualied professional. To comply with safety directives, an
omnipolar switch with a minimum contact distance of 3 mm
must be installed. Do not use multiple sockets or extensions.
Important! Safety cutout devices must be included
in the mains power supply in compliance with the installation
regulations in the country concerned.
Loading ...
Loading ...
Loading ...