Loading ...
Loading ...
Loading ...
In the event of a breakdown
120
C-Zero_en_Chap08_en-cas-de-panne_ed01-2016
2. Ination
F Check that the compressor switch A is in
the "OFF" position.
F Fully uncoil the compressor pipe B.
F Connect this pipe to the valve of the
repaired wheel.
F Connect the compressor's electric plug to
the vehicle's 12 V socket (ignition switch in
position "ON" or "ACC").
F Start the compressor by turning the
switch A to the "ON" position.
F Using the compressor, adjust the pressure
in accordance with the vehicle's tyre
pressure label (located in the driver's door
aperture).
A loss of pressure indicates that the
puncture has not been fully plugged;
contact a CITROËN dealer or a qualified
workshop for assistance.
F Remove the compressor and stow the kit.
F Drive off straight away at reduced
speed (50 mph [80 km/h] max) limiting
the distance travelled to approximately
120 miles (200 km).
As soon as possible, go to a CITROËN
dealer or a qualified workshop.
You must tell the technician that you
have used the kit. After checking, the
technician will advise you whether
the tyre can be repaired or must be
replaced.
If after around 5 to 7 minutes the
required pressure is not attained, this
indicates that the tyre is not repairable;
contact a CITROËN dealer or a
qualified workshop for assistance.
Loading ...
Loading ...
Loading ...