Loading ...
Loading ...
Loading ...
Practical information
106
Bonnet
Protects the components in the front compartment and provides access for checking levels, charging the 12 V battery, changing fuses, etc.
F Push the exterior safety catch B to the left
and raise the bonnet.
F Open the bonnet fully and on the right,
unclip the stay C from its holder.
F Fit the stay C in one of the two notches to
hold the bonnet open.
F Open the front right door.
F Pull the interior release lever A, located at
the bottom of the door aperture.
Opening Closing
F Take the stay out of the support notch.
F Clip the stay in its housing.
F Lower the bonnet and release it at the end
of its travel.
F Pull on the bonnet to check that it is fully
latched.
Do not press down on the middle of
the bonnet if it does not fully close, as
there is a risk of deforming it. Open the
bonnet fully and close it again.
The location of the interior release lever
prevents opening of the bonnet while
the front right door is closed.
Loading ...
Loading ...
Loading ...