Loading ...
Loading ...
Loading ...
||
09 Wheels and tyres
09
336
* Option/accessory, for more information, see Introduction.
Related information
•
Emergency puncture repair kit* - location
(p. 335)
•
Emergency puncture repair kit* - sealant
(p. 340)
•
Emergency puncture repair* (p. 334)
Emergency puncture repair* -
operation
Sealing a puncture with the emergency punc-
ture repair kit, Temporary Mobility Kit (TMK).
Emergency puncture repair
For information on the function of the parts, see
Emergency puncture repair kit* - overview
(p. 335).
1. Set up the warning triangle and activate
the hazard warning lights if a tyre is being
sealed in a trafficked location.
If the puncture was caused by a nail or
similar, allow this to remain in the tyre. It
helps to seal the hole.
2. Detach the label for maximum permitted
speed (which is fitted on one side of the
compressor) and affix it to the steering
wheel.
WARNING
You should not drive faster than 80 km/h
after the emergency tyre repair kit has
been used. Volvo recommends that you
visit an authorised Volvo workshop for
inspection of the sealed tyre (maximum
driving distance is 200 km). The staff there
can determine whether or not the tyre can
be repaired or if it needs to be replaced.
WARNING
The sealing fluid can irritate the skin. In the
case of contact with skin, wash away the
fluid with soap and water.
3. Check that the switch is in position 0 and
locate the cable and the air hose.
Loading ...
Loading ...
Loading ...