Loading ...
Loading ...
Loading ...
05 Loading and storage
05
* Option/accessory, for more information, see Introduction.
161
desired, the safety grille can be dismantled
and removed from the car.
For information about the tools required and
methods for fitting/removal, see the installa-
tion instructions
3
that were included with the
initial purchase.
For safety reasons, the safety grille must
always be correctly fastened and secured
when being refitted.
Related information
•
Safety net* (p. 158)
•
Loading (p. 155)
•
Load retaining eyelets (p. 157)
Cargo cover
G031977
Pull the cargo cover over the load and hook it
into the recesses at the cargo area's rear
posts.
IMPORTANT
The protective grille cannot be folded up
or down when the cargo cover is fitted.
Attaching the cargo cover
Move one end piece of the cover into the
recess on the side panel.
Move the other end piece into the corres-
ponding recess.
Press both sides in. A "click" should be
audible and the red marking should dis-
appear.
> Check that both end pieces are
locked.
Removing the cargo cover
1. Press in one end piece button and lift it
out.
2. Carefully angle the cover up/out and the
other end piece loosens automatically.
Lowering the cargo cover's rear sealing
disc
In its rolled-in position, the cargo cover's rear
sealing disc protrudes horizontally into the
cargo area when it is fitted.
– Pull the sealing disc back gently, free
from its support shelves, and lower.
Related information
•
Loading (p. 155)
•
Loading - long load (p. 156)
3
Installation instructions no. 30715972.
Loading ...
Loading ...
Loading ...