Loading ...
Loading ...
Loading ...
03 Instruments and controls
03
100
* Option/accessory, for more information, see Introduction.
Home safe light duration
Home safe lighting consists of dipped beam,
parking lamps, lamps in the door mirrors,
number plate lighting, interior roof lighting as
well as courtesy lighting.
Some of the exterior lighting can be kept
switched on to work as home safe lighting
after the car has been locked.
1. Remove the remote control key from the
ignition switch.
2. Move the left-hand stalk switch toward
the steering wheel to the end position and
release it. The function can be activated
in the same way as with main beam flash;
see Main/dipped beam (p. 92).
3. Get out of the car and lock the door.
When the function is activated, dipped beam,
parking lamps, door mirror lamps, number
plate lighting, interior roof lamps and courtesy
lighting are switched on.
The length of time for which the home safe
lighting should be kept on can be set in the
menu system MY CAR, see MY CAR (p. 114).
Related information
•
Approach lighting (p. 100)
Approach lighting
Approach lighting consists of parking lamps,
lamps in the door mirrors, number plate light-
ing, interior roof lighting as well as courtesy
lighting.
Approach lighting is switched on with the
remote control key, see Remote control key -
functions (p. 166), and is used to switch on
the car's lighting at a distance.
When the function is activated with the
remote control, the parking lamps, door mir-
ror lamps, number plate lighting, interior roof
lamps and courtesy lighting are switched on.
The length of time for which the approach
lighting should be kept on can be set in the
menu system MY CAR, see MY CAR (p. 114).
Related information
•
Home safe light duration (p. 100)
Headlamps - adjusting headlamp
pattern
If the car is equipped with active Xenon head-
lamps and has the Active main beam function
then the headlamp pattern must be reset
when changing from right to left-hand traffic,
and vice versa.
Active Xenon headlamps*
No adjustment of the headlamp pattern is
necessary for cars without the Active main
beam* function. The headlamp pattern is
designed in such a way that oncoming traffic
is not dazzled.
Adjustment of the headlamp pattern is
required for cars with Active main beam. The
car must be stationary with the engine run-
ning when the headlamp pattern is shifted
between right and left-hand traffic.
The headlamp pattern is changed in the menu
system MY CAR, see MY CAR (p. 114).
Halogen headlamps
No adjustment of the headlamp pattern is
necessary. The headlamp pattern is designed
in such a way that oncoming traffic is not
dazzled.
Loading ...
Loading ...
Loading ...