Loading ...
Loading ...
Loading ...
06 Locks and alarm
06
}}
* Option/accessory, for more information, see Introduction.
169
Using the information button
–
Press the information button .
> All indicator lamps flash for approxi-
mately 7 seconds and the light travels
around on the remote control key. This
indicates that information from the car
is being scanned.
If any of the other buttons are pressed
during this time then the reading is
interrupted.
NOTE
If none of the indicator lamps illumi-
nates with repeated use of the information
button and in different locations (as well as
after 7 seconds and after the light has
travelled around on the PCC), contact a
workshop - an authorised Volvo workshop
is recommended.
Indicator lamps display information in accord-
ance with the following illustration:
Green continuous light – the car is
locked.
Yellow continuous light – the car is
unlocked.
Red continuous light – the alarm has
been triggered since the car was locked.
Red light flashing alternately in both indi-
cator lamps – The alarm was triggered
less than 5 minutes ago.
Related information
•
Remote control key with PCC* - range
(p. 169)
Remote control key with PCC* - range
The range of a remote control key with PCC
(Personal Car Communicator) for locking,
unlocking the doors and tailgate is approx. 20
metres from the car - the other functions are
up to approx. 100 metres.
If the car does not verify a button being
pressed - move closer and try again.
NOTE
The information button function may be
disrupted by surrounding radio waves,
buildings, topographical conditions, etc.
Outside the remote control key's range
If the remote control key is too far away from
the car for the information to be read then the
status the car was last left in is shown, with-
out the light in the indicator lamps travelling
around on the remote control key.
If several remote control keys are used for the
car then it is only the one last used for lock-
ing/unlocking that shows the correct status.
NOTE
If no indicator lamps illuminate when
the information button is used within range
then this may be because the last commu-
nication between the remote control key
and the car was disrupted by surrounding
radio waves, buildings, topographical con-
ditions, etc.
Loading ...
Loading ...
Loading ...