Loading ...
Loading ...
Loading ...
22
USING THE OVEN
Rack and Pan Placement
A
B
C
D
E
F
G
Rack
If cooking on two racks:
* Place standard oven racks in positions B and D.
If cooking on three racks: (LRE3027 & LRE3085 models)
* Use standard racks in positions B and D and oset rack
in position F.
or (LRE3083 model)
* Use three standard racks in positions A, C and E.
Place the cookware as shown in the Multiple rack baking/
Single rack baking image below. If baking with more than
one pan, place the pans so that each one has at least 1” to
1 ½” of air space around them.
Oven vent
y Areas near the vent may become hot during operation
and may cause burns.
y Do not block the vent opening.
y Avoid placing plastics near the vent as heat may distort
or melt the plastic.
y It is normal for steam to be visible when cooking foods
with high moisture.
USING THE OVEN
BEFORE USING THE OVEN
REMOVING AND REPLACING THE
OVEN RACKS
• Replace oven racks before turning the oven on to
prevent burns.
• DO NOT cover the racks with aluminum foil, or any
other material, or place anything on the bottom of
the oven. Doing so will result in poor baking and
may damage the oven bottom.
• Only arrange oven racks when the oven is cool.
CAUTION
Removing the racks
:
1. While wearing oven mitts, grasp the oven rack.
2. Pull the rack straight out until it stops.
3. Lift up the front of the rack.
4. Pull out the rack.
Replacing the racks
:
1. While wearing oven mitts, place the end of the rack
on the support.
2. Tilt the front end of the rack up.
3. Push the rack in.
4. Check that the rack is properly in place.
Standard Rack
(Position B)
Standard Rack
(Position D)
Multiple rack baking
Standard Rack
Single rack baking
• When using an oven thermometer in the oven
cavity, the temperature may dier from the actual
set oven temperature.
• It is normal for the convection fan to run while
preheating during a regular bake cycle.
• The convection fan motor may run periodically
during a regular bake cycle.
NOTE
Loading ...
Loading ...
Loading ...