Loading ...
Loading ...
Loading ...
ENGLISH
19
USING THE COOKTOP
USING THE COOKTOP
COOKING AREAS
The cooking areas on your range are identi ed by
permanent circles on the glass cooktop surface. For the
most e cient cooking, t the pan size to the element
size.
Pans should not extend more than 1/2 to 1-inch be-
yond the cooking area.
When a control is turned on, a glow can be seen through
the glass cooktop surface. The element will cycle on
and o to maintain the preset heat setting, even on
Hi.
Hot surface indicator
HS (Hot Surface) will appear in the display once the
element is turned o or during the self clean cycle. The
HS indicator will stay on until the surface has cooled to
approximately 150°F (66°C) or when the self clean cycle
ends.
It is normal for the surface elements to cycle on and
off during cooking, even at higher settings. This
will happen more frequently if cooking on a lower
temperature setting.
CAUTION
Using the cooktop elements
To turn on a SINGLE element
1. Press the ON/OFF button that controls the element
that you would like to use.
2. Press the
+ button once to adjust the element tem-
perature to Hi, or the
– button once to adjust the
element temperature to Lo.
3. Use the
– / + buttons to adjust the element tem-
perature settings. The element temperature settings
are adjustable at all times.
4. To turn o the element after cooking, press the ON/
OFF button once.
• Hi is the highest temperature available.
• Lo is the lowest temperature available.
• Press and hold the
+
or
–
buttons to quickly scroll
through the temperature settings.
NOTE
For Model: LRE3027, LRE3085
For Model: LRE3083
For Model: LRE3021 / LRE6321
SINGLE
WARM
ZONE
SINGLE
DUAL
DUAL
SINGLE
WARM
ZONE
SINGLE
DUAL
SINGLE
SINGLE
SINGLE
DUAL
SINGLE
SINGLE
Loading ...
Loading ...
Loading ...