Loading ...
Loading ...
Loading ...
168
Multiple Exposures
Merging Multiple Exposures with an Image Recorded on the
Card
You can select a RAW image recorded on the card as the rst single
exposure. The image data of the selected RAW image will remain intact.
Only
1
or
F
images can be used. JPEG images cannot be
selected. Images you can specify also vary depending on the lens attached.
For details, see the table below.
1
Select [Select image for multi.
expo.].
2
Select the rst image.
z
Use the <
Y
> <
Z
> keys to select the
rst image, then press <
0
>.
z
Select [OK].
g
The le number of the selected image
will be displayed at the bottom of the
screen.
3
Take the picture.
z
When you select the rst image, the
number of remaining exposures as set
with [No. of exposures] will decrease
by 1.
z
Images You Can Select
Lens Attached
Cropped
Shooting
Selectable Images
RF/
EF lens
O RAW images captured at full size
On
RAW images from cropped shooting or taken with an
EF-S lens
EF-S lens –
o
These images cannot be selected as the rst single exposure: Images
captured with [
z
: Highlight tone priority] set to [Enable] or [Enhanced], or
images captured with [
z
:
z
Cropping/aspect ratio] not set to [Full-frame]
or [1.6x (crop)].
o
[Disable] is applied for [
z
: Lens aberration correction] and [
z
: Auto
Lighting Optimizer] regardless of the settings of the image selected as the
rst single exposure.
Loading ...
Loading ...
Loading ...