User Manual - Page 110

For 2016 FIAT PANDA.

Loading ...
Loading ...
Loading ...
adjust the clip C fig. 104 and
disconnect the electrical connector D;
turn the bulb holder E and remove
it, extract the bulb and replace it;
refit the new lamp and carry out the
procedure described previously in
reverse.
THIRD BRAKE LIGHTS
These are located in the tailgate and
are LED lights. For replacement,
contact a Fiat Dealership.
NUMBER PLATE LIGHTS
To replace the bulbs proceed as
follows:
remove lens A fig. 105;
replace the bulb A fig. 106, releasing
it from the side contacts;
Insert the new bulb and make sure
that it is correctly clamped between the
contacts, then refit the lens A fig. 106.
WARNING
133) Modifications or repairs to the electric
system that are not carried out properly
or do not take the system technical
specifications into account can cause
malfunctions leading to the risk of fire.
134) Halogen bulbs contain pressurised
gas; in the case of breakage they may
burst.
135) Before replacing the bulb, wait for the
catalytic converter to cool down: RISK
OF BURNS.
103
F1D0087
104
F1D0088
105
F1D0089
106
F1D0090
108
IN AN EMERGENCY
REVERSING LIGHT/REAR
FOG LIGHT
135)
The reversing lights and rear fog lights
are located in the rear bumper.
To replace the bulb, proceed as follows:
adjust the tabs A and remove the
flap B fig. 103
Loading ...
Loading ...
Loading ...