Loading ...
Loading ...
Loading ...
101
Compass-Calibration
1. For optimum calibration, switch off all
non-essential electrical accessories (rear window
defrost, heater/air conditioning, map lamps,
wipers, etc.) and ensure all doors are shut.
2. Drive to an open, level area away from large
metallic objects or structures.
3. Insert an appropriate diameter rod (paper clip)
into the left switch access hole underneath the
compass module and press gently for 1-2
seconds until “CAL” and a direction appear on
the display.
4. Release the button and drive in a circle until
“CAL” disappears from the display (approx. 2-3
circles).
Compass-Zone Adjustment
1. The zone setting is factory pre-set to Zone 8.
Refer to the Zone Map in this manual to verify
the correct compass zone setting for your
geographical location.
File:05fncfc.ex
Update:Fri Sep 6 14:53:57 1996
Loading ...
Loading ...
Loading ...