Loading ...
Loading ...
Loading ...
70
GB
BDV-N9200W/BDV-N9200WL/BDV-N7200W/BDV-N7200WL/BDV-N5200W
4-485-800-17(1)
D:\NORM'S JOB\SONY HA\SO150030\BDV-N9200_7200_5200_E3200
(PMRF)\4485800171_GB (CEK)\100ADD.fm
masterpage: Left
Wireless transmission is not activated
or there is no sound from the surround
speakers.
t Check the status of the LINK/
STANDBY indicator on the surround
amplifier.
• Turns off.
– Check that the AC power cord
(mains lead) of the surround
amplifier is connected securely.
– Turn the surround amplifier on
by pressing "/1 on the surround
amplifier.
•Flashes red.
– Press "/1 to turn off the
surround amplifier, and check
the following items.
1 Are the + and – speaker cords
short-circuited?
2 Is anything blocking the
ventilation holes of the
surround amplifier?
After checking the above items
and fixing any problems, turn on
the surround amplifier. If the
cause of the problem cannot be
found even after checking all the
above items, consult your
nearest Sony dealer.
• Flashes green or orange slowly or
turns red.
– Make the [Secure Link] setting
again (page 53).
– Sound transmission is poor.
Move the surround amplifier so
that the LINK/STANDBY
indicator turns green or orange.
– Move the system away from
other wireless devices.
– Avoid using any other wireless
devices.
• Turns green or orange.
– Check the speaker connections
and settings.
Noise is heard from surround speakers
or sound from the surround speakers
skips.
t Wireless transmission is unstable.
Change the [RF Channel] setting in
[Wireless Sound Connection]
(page 54).
t Install the main unit and surround
amplifier closer to each other.
t Do not install the main unit and
surround amplifier in a closed rack,
on a metal rack, or under a table.
Radio stations cannot be tuned in.
t Check that the antenna (aerial) is
connected securely. Adjust the
antenna (aerial) or connect an
external antenna (aerial) if
necessary.
t The signal strength of the stations is
too weak (when tuning in with
automatic tuning). Use manual
tuning.
The disc does not play.
t The region code on the BD/DVD
does not match the system.
t Moisture has condensed inside the
main unit and may cause damage
to the lenses. Remove the disc and
leave the main unit turned on for
about half an hour.
t The system cannot play a recorded
disc that is not correctly finalized
(page 73).
File names are not displayed correctly.
t The system can only display ISO
8859-1 compliant character
formats. Other character formats
may be displayed differently.
Wireless sound
Tuner
Playback
Loading ...
Loading ...
Loading ...