Loading ...
Loading ...
Loading ...
48
GB
BDV-N9200W/BDV-N9200WL/BDV-N7200W/BDV-N7200WL/BDV-N5200W
4-485-800-17(1)
D:\NORM'S JOB\SONY HA\SO150030\BDV-N9200_7200_5200_E3200
(PMRF)\4485800171_GB (CEK)\080OTH.fm
masterpage: Left
6 Press B/b to select [OK] or
[Cancel], then press .
7 Press V/v to select the item, then
press .
8 Press V/v to adjust the parameter.
9 Press B/b and to confirm the
settings.
Check the following settings.
x [Centre Speaker]
[On]
: The center speaker is connected.
[Off]: The center speaker is not
connected.
x [Distance]
When you move the speakers, be sure
to set the parameters of the distance
from the listening position to the
speakers.
You can set the parameters from 0.0 to
7.0 meters.
[Front Left/Right] 3.0 m
: Set the front
speaker distance.
[Centre] 3.0 m
: Set the center speaker
distance. This setting is only available
when [Centre Speaker] is set to [On].
[Surround Left/Right] 3.0 m
: Set the
surround speaker distance.
[Subwoofer] 3.0 m
: Set the subwoofer
distance.
x [Level]
You can adjust the sound level of the
speakers. You can set the parameters
from –6.0 dB to +6.0 dB. Be sure to set
[Test Tone] to [On] for easy adjustment.
[Front Left/Right] 0.0 dB
: Set the front
speaker level.
[Centre] 0.0 dB
: Set the center speaker
level. This setting is only available when
[Centre Speaker] is set to [On].
[Surround Left/Right] 0.0 dB
: Set the
surround speaker level.
[Subwoofer] 0.0 dB
: Set the subwoofer
level.
x [Relocation] (BDV-N9200W/
BDV-N9200WL/BDV-N7200W/
BDV-N7200WL only)
You can correct the speaker position
virtually to improve the surround effect.
[On]: You can hear sound from a
virtually relocated speaker position
determined by [Auto Calibration].
[Off]
: You can hear sound from the
actual speaker position.
• This setting is only reflected after
performing [Auto Calibration].
• You cannot select this function when the
speaker layout is set to [All Front].
x [Test Tone]
The speakers will emit a test tone to
adjust [Level].
[Off]
: The test tone is not emitted from
the speakers.
[On]: The test tone is emitted from each
speaker in sequence while adjusting
level. When you select one of the
[Speaker Settings] items, the test tone is
emitted from each speaker in sequence.
Adjust the sound level as follows.
1 Set [Test Tone] to [On].
2 Press V/v to select [Level], then press
.
3 Press V/v to select the speaker type
you want, then press .
4 Press B/b to select the left or right
speaker, then press V/v to adjust the
level.
5 Press .
6 Repeat Steps 3 to 5.
Note
Loading ...
Loading ...
Loading ...