Loading ...
Loading ...
Loading ...
3
Connect your
Android TV
3.1
Network and Internet
Home Network
To enjoy the full capabilities of your Philips Android
TV, your TV must be connected to the Internet.
Connect the TV to a home network with a high-speed
Internet connection. You can connect your TV
wirelessly or wired to your network router.
Connect to Network
Wireless Connection
What you need
To connect the TV to the Internet wirelessly, you need
a Wi-Fi router with a connection to the Internet.
Use a high-speed (broadband) connection to the
Internet.
Make the Connection
Wireless
Follow steps 1 to 5.
Step 1 - Make sure that the router of your wireless
network is switched on.
Step 2 - Consumer Mode:
On
Press
HOME and select Features and
press OK.
Guest Mode: On
Guest Menu: Not available in this
mode.
(For professional mode information, please refer to
Installation manual)
Step 3 - Select Wireless and Networks > Connect to
network and press OK.
Step 4 - Select Connect to network and press OK.
Step 5 - Select Wireless and press OK.
WPS
If your router has WPS, you can directly connect to
the router without scanning for networks. Go to the
router, press the WPS button and return to the TV
within 2 minutes. Then press Connect to make the
connection.
If you have devices in your wireless network that use
the WEP security encryption system, you cannot use
WPS.
1 - Consumer Mode: On
Press
HOME and
select Features and press OK.
Guest Mode: On
Guest Menu: Not available in this
mode.
(For professional mode information, please refer to
Installation manual)
2 - Select Wireless and Networks > Settings and
press OK.
3 - Select Network type > WPS then press OK.
4 - Go to the router, press the WPS button and return
to the TV within 2 minutes.
5 - Select Connect to make the connection.
6 - A message will be shown when the connection is
successful.
WPS with PIN Code
If your router has WPS with a PIN code, you can
directly connect to the router without scanning for
networks. If you have devices in your wireless
network that use the WEP security encryption system,
you cannot use WPS.
1 - Consumer Mode: On
Press
HOME and
select Features and press OK.
Guest Mode: On
Guest Menu: Not available in this
mode.
(For professional mode information, please refer to
Installation manual)
2 - Select Wireless and Networks > Settings and
press OK.
3 - Select Network type > WPS with PIN code and
press OK.
4 - Write down the 8-digit PIN code shown on
screen and enter it in the router software on your PC.
Consult the router manual on where to enter the PIN
6
Loading ...
Loading ...
Loading ...