Loading ...
Loading ...
Loading ...
14
INSTALLATION
EN
1
Open the bottom drawer and remove the cover
from the appliance.
2
Turn the levelling leg to the left to raise that
side of the appliance or to the right to lower it.
It may take several turns of the levelling leg to
adjust the tilt of the appliance.
3
Open the door and the drawers and check to
make sure that they close easily. If they do not
close easily, tilt the appliance slightly more to
the rear by turning both levelling legs to the
left. It may take several more turns, and be
sure to turn both levelling legs the same
amount.
4
When the appliance is level, open the bottom
drawer and reassemble the cover.
Turning on the Power
Connecting the Appliance
After installing the appliance, connect the power
plug into the outlet socket.
NOTE
• After connecting the power supply cord (or plug)
to the outlet, wait 3 or 4 hours before you put
food into the appliance. If you add food before
the appliance has cooled completely, your food
may spoil.
Moving the Appliance for
Relocation
Preparing for Relocation
1
Remove all food from inside the appliance.
2
Pull the power plug out, insert and fix it into the
power plug hook at the rear or on top of the
appliance.
3
Tape parts such as shelves and the door handle
to prevent from falling off while moving the
appliance.
4
Move the appliance with more than two people
carefully. When transporting the appliance
over a long distance, keep the appliance
upright.
5
After installing the appliance, connect the
power plug into a mains outlet socket and
switch it on.
Loading ...
Loading ...
Loading ...