Loading ...
Loading ...
Loading ...
Note: For all vehicles with a non Ford-approved remote start installed, it
is possible to program all ’real’ keys as MyKeys威, in which case, you will
need to use your remote start system to reset all MyKeys威 as admin keys
by doing the following:
1. Enter the vehicle, close all doors.
2. Remote start the vehicle using your non Ford-approved remote start
fob.
3. Follow Steps 1-4 in the Clear MyKey威 section.
Troubleshooting
Condition Potential Causes
Can’t create a MyKey威 • Key in the ignition is already a MyKey威.
• Key in the ignition is the last remaining
admin key (there always has to be at least
one admin key).
• Intelligent access key (if equipped) is not
in the backup slot (for vehicles with push
button start).
• SecuriLock威 passive anti-theft system is
disabled or in unlimited mode.
• Vehicle has been started using a non
Ford-approved remote start system that is
programmed as MyKey威. Refer to Using
MyKey威 with remote start systems section.
Cannot program the
MyKey威 optional settings
• Key in the ignition is a MyKey威.
• No MyKeys威 are programmed to the
vehicle. Refer to Create a MyKey威 section.
• Vehicle has been started using a non
Ford-approved remote start system that is
programmed as MyKey威. Refer to Using
MyKey威 with remote start systems section.
Cannot clear MyKey威 • Key in the ignition is a MyKey威 .
• No MyKeys威 are programmed to the
vehicle. Refer to Create a MyKey威 section.
• Vehicle has been started using a non
Ford-approved remote start system that is
programmed as MyKey威. Refer to Using
MyKey威 with remote start systems section.
Lost the only admin key • Purchase a new key from your authorized
dealer.
Locks and Security
133
2011 Explorer (exp)
Owners Guide, 4th Printing
USA (fus)
Loading ...
Loading ...
Loading ...