Loading ...
Loading ...
Loading ...
• If equipped, any of the following: parking aid, blind spot information
system (BLIS威) with cross traffic alert and forward collision warning
systems cannot be turned off.
Optional settings – these settings can be changed
• Vehicle speed is limited to 80 mph (130 km/h). Visual warnings are
displayed followed by a chime when the vehicle speed has reached
80 mph (130 km/h).
• Visual warnings are displayed followed by a chime when a preselected
vehicle speed of 45, 55 or 65 mph (75, 90, or 105 km/h) is exceeded.
• The maximum volume of the audio system is limited to 45%. MYKEY
VOLUME LIMITED will be displayed in the audio system display when
attempting to exceed the limited volume.
• The AdvanceTrac威 system cannot be turned off. When this optional
setting is on, the MyKey威 user will not be able to deactivate the
system. Note: It may be beneficial to deactivate the AdvanceTrac威
system if the vehicle is stuck in snow, mud, or sand.
Create a MyKey威
To program MyKey威 on one of the keys programmed to the vehicle,
insert the key that you want to make a MyKey威 into the ignition. For
vehicles equipped with push button start, put the intelligent access key
in the backup slot with brand logo facing up; refer to Starting in the
Driving chapter for the location of the backup slot. Turn the ignition on.
Use the message center buttons to do the following:
1. Get into main menu, select SETTINGS then MYKEY by pressing OK
button or the right arrow button.
2. Press OK to select CREATE MYKEY.
3. Hold the OK button as prompted until you see a message that the key
is restricted.
MyKey威 is successfully programmed. Make sure you label it so you can
distinguish it from the admin keys. Note: To program the optional
settings go to Step 2 in the Programming MyKey威 Optional Settings
section. If your vehicle is equipped with remote start, see the Using
MyKey威 with remote start systems section.
Note: All MyKeys威 can be cleared within the same key cycle that it was
created, otherwise an admin key is required to clear the MyKey威
programming. To clear all MyKeys威 go to Step 2 in the Clear MyKey威
section.
Locks and Security
130
2011 Explorer (exp)
Owners Guide, 4th Printing
USA (fus)
Loading ...
Loading ...
Loading ...