Loading ...
Loading ...
Loading ...
English
171
Disc error has occurred.
Formatting is not
complete.
The disc may be dirty.
Remove the disc and wipe off fingerprints, dust, etc. before reusing
it, or use another disc.
This message may also appear if you insert a disc for which
formatting was interrupted midway. In this case, use another disc.
86, 138
Disc error has occurred.
Keep disc inside &
restart.
Disc error could have occurred during editing of scenes.
Turn off the DVD video camera/recorder with the disc being used in
it, connect AC adapter/charger, and then power the DVD video
camera/recorder again. Repair of scenes will be tried.
47
Disc error. • Use another disc.
• See *3 on page 174.
28, 86
• Mismatch in recording information may be caused by editing
done on some device other than this DVD video camera/recorder.
Initialise the disc or use another disc.
• Initialising the disc will erase all data on it.
138
“DISC ERROR” appears
when an attempt to
release write-protect is
made.
If you have write-protected a disc using the write-protect setting tool
(WPTOOL) that is equipped with the UDF driver contained on the
CD-ROM provided with this DVD video camera/recorder, you
cannot release the write-protect on this DVD video camera/
recorder as is. Use the write-protect setting tool on PC to release the
write-protect.
Disc full. Cannot
execute.
Delete unnecessary scenes before using this disc, or use another
disc.
114
Disc has no data. This message will appear when an attempt is made to execute
playback or editing on Disc Navigation with no scene recorded.
Disc has no Play List. Switching of play list was selected with no play list stored. 130
Disc includes protected
scenes. Delete scenes?
The disc may be software protected from a device other than this
DVD video camera/recorder. To release this case, use a device that
has executed software-protect.
Disc is full. Cannot add
control info.
The number of entered scenes has reached the limit that can be
entered, so the control information for generating thumbnails
cannot be added.
Combine several scenes or delete them.
114, 119
Disc is not formatted.
Format the disc now?
• Has the disc been initialised on a PC?
Choose “YES” and initialise the disc when using it on this DVD
video camera/recorder. Initialisation will delete all data on the disc.
• See *2 on page 174.
138
DPOF is not set to a
scene.
This message will appear when “Slide Show: DPOF” is specified for
the card to which DPOF was not set.
142
DPOF scenes over limit.
Cannot set DPOF
scenes.
The maximum number of scenes for which DPOF can be set is 999.
123
Drive overheat. Please
retry later.
The temperature inside the DVD video camera/recorder is too high,
and reading or writing of the data on disc may not be performed
normally.
Turn the DVD video camera/recorder off and wait for a while. The
temperature will be effectively decreased if the DVD video camera/
recorder is placed in a well-ventilated spot.
52
Message Cause & Troubleshooting
Reference
page
Loading ...
Loading ...
Loading ...