Loading ...
Loading ...
Loading ...
69
Steering mounted controls
EASE OF USE and COMFORT
4
Partner2VP_en_Chap04_Ergonomie_ed02-2016
Exceeding the programmed
speed
Switching the function off
Operating fault
The programmed speed is cleared
then replaced by three dashes.
Contact a PEUGEOT dealer or a
qualied workshop to have the system
checked.
Flashing of the speed setting
Good practice
In any event, the speed limiter cannot
replace the need to observe speed
limits, nor can it replace the need for
vigilance on the part of the driver.
Always pay attention to the prole
of the road and sharp acceleration
and stay in complete control of your
vehicle.
To avoid any jamming under the
pedals:
- ensure that the mat and its xings
on the oor are positioned correctly,
- never place one mat on top of
another.
Pressing the accelerator pedal in order
to exceed the programmed speed
will have no effect unless you press
the pedal rmly beyond the point of
resistance.
The limiter is deactivated temporarily
and the programmed speed ashes
accompanied by an audible signal.
To return to the limiter function, reduce
your speed to below the programmed
speed.
The speed setting ashes:
- following forcing of the accelerator
point of resistance,
- when the limiter cannot prevent an
increase in the vehicle speed due
to the prole of the road or on a
steep descent,
- in the event of sharp acceleration.
- Place the switch in position 0 or
switch off the ignition to switch the
system off.
The last programmed speed remains in
the memory.
Loading ...
Loading ...
Loading ...