Loading ...
Loading ...
Loading ...
172
Partner2VP_en_Chap08_Aide-rapide_ed02-2016
Changing a wheel
Partner2VP_en_Chap08_Aide-rapide_ed02-2016
The temporary tyre repair kit consists
of a compressor and a bottle
(containing a sealant).
Using the kit
- Tick the deated wheel on the
speed limitation sticker then afx
the sticker to the vehicle's steering
wheel to remind you that a wheel is
in temporary use.
-
Clip the bottle 1 on the compressor 2.
- Connect the bottle 1 to the valve of
the tyre to be repaired.
- Take care to unwind the
compressor pipe before connecting
it to the bottle.
- Connect the power lead to one of
the vehicle's 12V sockets.
- Switch on the compressor by
pressing button A until the tyre
pressure reaches 2.0 bars. If this
pressure cannot be reached, the
tyre cannot be repaired.
- Remove and store the compressor.
- Drive immediately, for a few miles
(kilometres), at reduced speed, to
ll the puncture.
- Adjust the pressure using the
compressor in accordance with the
recommendation for the vehicle and
check that the leak is lled correctly
(no further loss of pressure).
- Drive at reduced speed (50 mph
[80 km/h]). The tyre must be
examined and repaired by a
specialist as soon as possible.
After use, the bottle can be stored in
a plastic bag, supplied in the kit, to
avoid staining your vehicle with traces
of uid.
Warning: the sealant product is
harmful if swallowed and causes
irritation to the eyes.
Keep it out of reach of children.
After use, do not discard the bottle
into the environment, take it to a
PEUGEOT dealer or to an specialised
waste disposal site.
Replacement bottles of sealant are
available from PEUGEOT dealers.
TEMPORARY PUNCTURE
REPAIR KIT
The kit is located in one of the two
storage compartments located under
the front seats.
Vehicles supplied with a temporary
puncture repair kit do not have a spare
wheel or tooling (jack, wheelbrace, ...).
Loading ...
Loading ...
Loading ...