Loading ...
Loading ...
Loading ...
26
Access
Partner2VP_en_Chap03_Pret-a-partir_ed02-2016
REAR ROOF FLAP
Support bar
A support bar is provided for
transporting long loads, after opening
the rear roof ap.
Fold back the support bar by lifting the
lever.
Guide it to the door pillar.
Support the long loads to be
transported, lift them and reposition the
support bar with one hand.
Ensure that it is secured correctly by
pressing the handle downwards past
the point of resistance and secure the
loads rmly.
The rear bumper has been
reinforced to serve as a footrest
when entering the vehicle.
The rear doors only lock when the
support bar is installed.
When the rear roof ap is open, take
care when driving where height is
restricted.
Never rest loads directly on the rear
doors.
Comply with the usual indications, to
warn other drivers.
Reserve the use of the rear roof ap
for short journeys.
The side supports can be used as
hooking points.
- lower the black paddle to secure
the rear roof ap.
Securing the rear roof ap places it on
the seal correctly and ensures sealing
without noise.
This rear roof ap is only compatible
with side-hinged rear doors.
To open the rear roof ap:
- raise the black paddle of the toggle,
- relieve the toggle by pressing the
rear roof ap (downwards) then
release the hook,
- lift the rear roof ap,
- pass the point of resistance to
secure the rear roof ap using the
support stays.
Never drive without the stays in place.
To close the rear roof ap:
- check that the support bar is
secured correctly,
- lower the rear roof ap,
- while pressing the rear roof ap
(downwards), take hold of the
two loops of the spring then place
the hook in its housing,
Never attach any load to the rear roof
ap.
Never drive without the support bar in
place.
Loading ...
Loading ...
Loading ...