Loading ...
Loading ...
Loading ...
176
Partner2VP_en_Chap08_Aide-rapide_ed02-2016
Changing a wheel
Partner2VP_en_Chap08_Aide-rapide_ed02-2016
When using the non-uniform spare
wheel, do not exceed a speed of
50 mph (80 km/h).
The spare wheel is not designed to
be used over long distances. Have
the tightening of the bolts and the tyre
pressure checked by a PEUGEOT
dealer or a qualied workshop as soon
as possible.
Have the original wheel repaired
and retted by a PEUGEOT dealer
or a qualied workshop as soon as
possible.
5. Fitting the spare wheel
- Position the wheel on the hub and
start tightening the bolts by hand.
- Carry out an initial tightening of the
bolts using the wheelbrace.
- Lower the vehicle completely by
folding the jack, then remove the
jack.
- Tighten the bolts again using the
wheelbrace, tighten them fully
without forcing them.
- Place the wheel to be repaired in
the carrier.
- Secure the carrier on the hook then
raise the carrier by tightening the
bolt with the wheelbrace.
- Fully tighten the bolt, then check
that the wheel is held at against
the oor.
If this is not the case, repeat the
operation.
Never go underneath a vehicle
that is supported only by a jack
(use a stand).
Never use a power driver in place of
the wheelbrace.
Loading ...
Loading ...
Loading ...