User Manual - Page 57

For 2017 PEUGEOT PARTNER TEPEE.

Loading ...
Loading ...
Loading ...
55
READY TO GO
3
Partner2VP_en_Chap03_Pret-a-partir_ed02-2016
Stop & Start
Partner2VP_en_Chap03_Pret-a-partir_ed02-2016
The Stop & Start system
requires a battery of specic
characteristics. All work on this
type of battery must be done only
by a PEUGEOT dealer or a qualied
workshop.
For more information on the 12 V
battery, refer to "Battery" in section 8.
Good practice when stopping
Good practice when starting
Diesel pre-heating warning
lamp
If the temperature is high
enough, the warning lamp
comes on for less than
one second, you can start
without waiting.
In cold weather, wait for this warning
lamp to go off then operate the starter
(Starting position) until the engine
starts.
Door or bonnet open warning lamp
If this comes on, a door or
the bonnet is not closed
correctly, check!
Minimise engine and gearbox wear
When switching off the ignition, let the
engine run for a few seconds to allow
the turbocharger (Diesel engine) to
return to idle.
Do not press the accelerator when
switching off the ignition.
There is no need to engage a gear
after parking the vehicle.
STARTING AND STOPPING
Running and accessories position.
To unlock the steering, turn the
steering wheel gently while turning the
key, without forcing. In this position,
certain accessories can be used.
Starting position.
The starter is operated, the engine
turns over, release the key.
STOP position: steering lock.
The ignition is off. Turn the steering
wheel until the steering locks. Remove
the key.
Opening the bonnet
Before doing anything under the
bonnet, deactivate the Stop & Start
system to avoid the risk of injury
related to an automatic change to
START mode.
Driving on ooded roads
Before driving through a ooded road,
it is strongly recommended that you
deactivate the Stop & Start system.
For more advice on driving, particularly
on ooded roads, refer to the
corresponding section.
Loading ...
Loading ...
Loading ...